Home » Products » Vibration and Acoustic Isolation

Vibration and Acoustic Isolation

Vibration and Acoustic Isolation

The Walraven VibraTek^® product range consists of anti-vibration and acoustic isolators for mechanical services and HVAC equipment. The operation of mechanical and electrical (M&E) services generates varying degrees of noise and vibration which, if left untreated, have the potential to cause damage to the equipment itself as well as to disturb occupants within a building. Find out more about dealing with vibration or browse our product range below.

24 results found Filter

Walraven VibraTek® MS-M Spring Mount
- low-rise spring isolator with M8 external thread for light equipment or tight spaces
- recommended for machinery with working speeds above 1000 rpm
- steel frame attached to spring mechanically with metal rivets
For more information
Walraven VibraTek® MS-1 Spring Mount
- recommended for equipment with low working speeds, from 700 RPM and above
- epoxy powder-coated base, caps and springs provide increased resistance to corrosion
- ribs in the metal base provide increased stiffness
For more information
Walraven VibraTek® MS-1X Spring Mount
- recommended for equipment with low working speeds, from 600 rpm and above
- epoxy powder-coated base, caps and springs provide increased resistance to corrosion
- flexible internal filler prevents debris and solid elements entering and damaging the spring under load
For more information
Walraven VibraTek® MS-2X Spring Mount
- recommended for equipment with low working speeds, from 600 rpm and above
- epoxy powder-coated base, caps and springs provide increased resistance to corrosion
- flexible internal filler prevents debris and solid elements entering and damaging the spring under load
For more information
Walraven VibraTek® MS-4 Spring Mount
- recommended for equipment with low working speeds, from 600 rpm and above
- epoxy powder-coated base, caps and springs provide increased resistance to corrosion
- flexible internal filler prevents debris and solid elements entering and damaging the spring under load
For more information
Walraven VibraTek® MR-L 1000/M8 Rubber Levelling Mount
- recommended for machinery with working speeds above 2500 RPM, providing a degree of vibration insulation from 75% to 80%
- simple to install and does not need to be fixed to the supporting structure
- rubber isolator with DIN 934 nuts and DIN 9012 washers included in delivery for mounting and levelling equipment
For more information
Walraven VibraTek® MR-L 3000/M10 Rubber Levelling Mount
- recommended for machinery with working speeds above 2500 RPM, providing a degree of vibration insulation from 75% to 80%
- simple to install and does not need to be fixed to the supporting structure
- rubber isolator with DIN 934 nuts and DIN 9012 washers included in delivery for mounting and levelling equipment
For more information
Walraven VibraTek® MR-L 5000/M12 Rubber Levelling Mount
- recommended for machinery with working speeds above 2500 RPM, providing a degree of vibration insulation from 75% to 80%
- simple to install and does not need to be fixed to the supporting structure
- rubber isolator with DIN 934 nuts and DIN 9012 washers included in delivery for mounting and levelling equipment
For more information
Walraven VibraTek® MR-L 8000/M16 Rubber Levelling Mount
- recommended for machinery with working speeds above 2500 RPM, providing a degree of vibration insulation from 75% to 80%
- simple to install and does not need to be fixed to the supporting structure
- rubber isolator with DIN 934 nuts and DIN 9012 washers included in delivery for mounting and levelling equipment
For more information
Walraven VibraTek® MR-B Rubber Mount
- recommended for machinery with working speeds above 2500 RPM, providing a degree of vibration insulation from 75% to 80%
- ideally suited for machinery with radial vibration (as opposed to axial) and prone to sudden or pronounced starts and stops)
- metal and rubber parts can be separated for recycling
For more information
Walraven VibraTek® MS-1X-CBL Spring Mount
- recommended for machinery with low working speeds above 600 RPM
- epoxy powder-coated base, caps and springs provide increased resistance to corrosion
- flexible internal filler prevents debris and solid elements entering and damaging the spring under load
For more information
Walraven VibraTek® A-L1 Angle Bracket for Welding
- for welding to concrete inertia base frames and use in combination with MS-1X-CBL spring isolators
- epoxy-powder coated for corrosion resistance
- welding provides flexibility in application design
For more information
Walraven VibraTek® HS-1 Spring Hanger
- simple to install and does not need to be fixed to the base material
- recommended for machinery with low working speeds above 700 RPM
- epoxy powder-coated housing, cap and spring provide increased resistance to corrosion
For more information
Walraven VibraTek® HS-1X Spring Hanger
- simple to install and does not need to be fixed to the base material
- recommended for machinery with low working speeds above 700 RPM
- epoxy powder-coated housing, cap and spring provide increased resistance to corrosion
For more information
Walraven VibraTek® HR-1 Rubber Hanger
- small footprint allows placement in compact spaces
- simple to install and adaptable to a sloping roof or ceiling, part of the metal housing swivels
- hardness 45 / 50 shore A
For more information
Walraven VibraTek® SA-1 Silent Absorber
- a versatile viscoelastic rubber absorber for preventing metal-to-metal contact in joined or fastened surfaces
- simple installation
- with Ø 8mm hole for use with M8 threaded rods
For more information
Walraven VibraTek® SA-2 Silent Absorber
- a versatile viscoelastic rubber absorber for preventing metal-to-metal contact in joined or fastened surfaces
- simple installation
- with Ø 14mm hole for use with M10 and M12 threaded rods
For more information
Walraven VibraTek® SA-3 Silent Absorber
- formed of two rubber parts which fit into each other, making it is suitable for various fixing plate thicknesses
- ideal isolation of HVAC equipment
- for use with M8 threaded rods
For more information
Walraven VibraTek® SA-W Silent Washer
- viscoelastic rubber washers that cushion and prevent transmission of vibroacoustic effects to the structure
- working temperature range -20 ˚C till 90 ˚C
For more information
Walraven VibraTek® SB-MM Silentblock
- a universal rubber absorber, ideal for use with all kinds of elastic suspension or mounting of equipment
- ideal for use with machinery and equipment mounted on metallic surface
- for use in compression only
For more information
Walraven VibraTek® SB-MF Silentblock
- a universal rubber absorber, ideal for use with all kinds of elastic suspension or mounting of equipment
- ideal for use with machinery and equipment mounted on metallic surface
- for use in compression only
For more information
Walraven VibraTek® SB-FF Silentblock
- a universal rubber absorber, ideal for use with all kinds of elastic suspension or mounting of equipment
- ideal for use with machinery and equipment mounted on metallic surface
- for use in compression only
For more information
Walraven VibraTek® SB-M Silentblock
- a universal rubber absorber, ideal for use with all kinds of elastic suspension or mounting of equipment
- ideal for use with machinery and equipment mounted on metallic surface
- for use in compression only
For more information
Walraven VibraTek® PR-T Rubber Tile Pad
- ideal for use as an elastic isolating support for equipment and metal structures
- individual 50x50mm pieces can be easily cut to form required support shape
- transforms to elastic base support when used with a hexagon head screw
For more information

export@walraven.com

+31 297 23 30 00

To top

Asia

China

South East Asia & Pacific

North America

India, Middle East and Africa

Or visit our international website.