Installations above escape routes
Installations above escape routes and emergency exits
It is not uncommon for mechanical and electrical installations to be fitted above escape routes and emergency exits. If there is a fire rated suspended ceiling below the installations, there are certain criteria to be considered for the fixing products used to ensure they do not fail in the event of a fire and cause damage to the fire rated escape route.
Fire rated fixing products
It is of vital importance that an escape route or emergency exit remains free of obstacles in the event of a fire. For fixing of installations in areas above (fire rated) suspended ceilings where only fixing materials can be applied that meet requirements for firmness and deformation. Walraven offers an extensive range of fixing solutions which have been tested for their fire resistance.
Go back to Fire Protection SystemsHere are some examples of what can happen to fixings in the event of a fire:
Deformation of strut rail systems
Before and after fire
Deformation of clamps and threaded rod
Before and after fire
Given the effect of fire on these fixings, it is important to ensure a minimum safe distance between the installation and the suspended ceiling. Many of our rails, clamps and accessories have been tested in fire situations. Contact us to find out more or browse our product catalogue.
Fire tested product selection
BIS Objímky pro těžké upevnění HD1501 (M8/10, M10/12) (BUP1000)
- dvoudílná objímka s dvěma uzavíracími šrouby
- až do průměru 5" včetně, je uzavírací matice umístěna a zajištěna v plastovém držáku
- mohutný vzhled
BISMAT® Flash
- jednošroubová objímka
- s BISMAT® Flash rychlouzavíracím systémem
- jednoduché uzavření objímky jednou rukou
Walraven RapidStrut® Montážní lišty (BUP1000)
- univerzální lištový systém
- ochrana proti korozi zůstane neporušena i po řezání
- vzdálenost mezi koncem lišty a prvním otvorem je vždy stejná
WDI1R Úderové kotvy – krátké
- jednoduchá a rychlá instalace
- límec umožňuje zarovnání s povrchem bez ohledu na hloubku otvoru
- střední únosnost