Walraven RapidStrut® channel system
The Walraven RapidStrut® channel system offers high speed and safe installation. It consists of various rail profiles and an extensive range of accessories for all medium applications.
Insert, lock, done!
Walraven RapidStrut® channel accessories are pre-assembled and delivered ‘ready-to-use’ to the building site. For example, the plastic spring on the slide nut allows it to be fixed into the rail with one easy twist. The Walraven RapidStrut® channel system is so easy to use, that it is possible to save up to 40% in fixing time!
Safety first!
All strut rails have inward formed flanges with serrated profile for extra grip. Together with the serrated design of slide nuts, it allows easy and safe positioning of accessories.
Also available with our Walraven UltraProtect® 1000 finish!
As well as pre-galvanised and hot dip galvanised finishes, many parts of the Walraven RapidStrut® channel system are also available in our special BIS UltraProtect® 1000 finish which offers additional corrosion resistance of up to 1000 hours. This far exceeds hot dip galvanised (up to 600 hours) and zinc plated (up to 80 hours) products.
Features & Benefits
- Quick and safe installation
- Saves up to 40% fixing time!
- Accessories pre-assembled ‘ready-to-use’
- For all medium applications
- Also available with Walraven BIS UltraProtect® 1000 finish
Click here for an overview of all our Walraven RapidStrut® channel products
Back to medium installation solutions
Walraven RapidStrut® channel product selection:
Walraven RapidStrut® Channel DS 5 (BUP1000)
- for quick and easy fixing
- unique hole pattern, allowing BIS RapidStrut® Accessories to be mounted on both sides of the rail
- very high corrosion resistance (Walraven BIS UltraProtect® 1000)
BIS RapidStrut® Hammerfix G2 (BUP1000)
- slide nut with stud bolt, U-shaped washer and BIS RapidStrut® spring
- ready-to-use pre-assembled for a quick fixing, and retains assembly in place before final tightening
- replaces tee-nut, washer and threaded rod with 1 piece assembly
Walraven RapidStrut® Rail T- and X-Connector G2 (BUP1000)
- connector with pre-assembled BIS RapidStrut® Slide nut(s)
- to make fabrication with Strut Rail
- ready-to-use pre-assembled for a quick fixing, and retains assembly in place before final tightening
BIS RapidStrut® Slide Nuts G2 (BUP1000)
- slide nut with washer and BIS RapidStrut® spring
- ready-to-use pre-assembled for a quick fixing, and retains assembly in place before final tightening
- replaces tee-nut and washer with single piece
Or visit our international website.