Excellent corrosion protection
Walraven BIS UltraProtect® 1000 is a unique support system that is suitable for indoor and outdoor use. Unique in terms of scope, composition and corrosion resistance, making it the most sustainable solution for fixing or supporting mechanical installations, solar power systems and other types of installations. With the Walraven BIS UltraProtect® 1000 system, Walraven has obtained a leading position in the field of pipe fixing solutions!
The benefits of Walraven BIS UltraProtect® 1000:
- Extensive fixing system for indoor and outdoor applications;
- Suitable for corrosive environments (C1–C4 in accordance with ISO 12944-2);
- All applied surface treatments effortlessly withstand a salt spray test of at least 1000 hours (until the occurrence of maximum 5% red rust);
- The best alternative for hot dip galvanizing;
The alternative for hot dip galvanizing
The products falling under the Walraven BIS UltraProtect® 1000 system have high corrosion resistance. Effortlessly they withstand a salt spray test of at least 1000 hours (according to ISO 9227), whereas hot dip galvanized products withstand up to 300-600 hours).
Despite a relatively thin protective layer, the corrosion resistance is high. The products from the Walraven BIS UltraProtect® 1000 system not only feel smooth and have a beautiful finish, they also look optically attractive. An additional advantage of the relatively thin protective layer is that products with threaded holes or rods are also well protected against corrosion.
Extensive range
The Walraven BIS UltraProtect® 1000 system includes products for fixing pipes, air ducts, as well as various products for making load-bearing rail constructions such as solar panels and air-conditioning systems. As various Walraven RapidStrut® channel products are included in the system, speed and ease of installation are guaranteed!
Read more about our Walraven BIS UltraProtect® 1000 products
Walraven RapidStrut® Channel DS 5 (BUP1000)
- for quick and easy fixing
- unique hole pattern, allowing BIS RapidStrut® Accessories to be mounted on both sides of the rail
- very high corrosion resistance (Walraven BIS UltraProtect® 1000)
BIS Heavy Duty Clamp HD1501 (1/2″) (BUP1000)
- two-part clamp with two locking bolts
- up to and including 5": locking nut is captive, hidden in plastic holder
- heavy design
BIS RapidStrut® Hammerfix G2 (BUP1000)
- slide nut with stud bolt, U-shaped washer and BIS RapidStrut® spring
- ready-to-use pre-assembled for a quick fixing, and retains assembly in place before final tightening
- replaces tee-nut, washer and threaded rod with 1 piece assembly
Walraven RapidStrut® Rail T- and X-Connector G2 (BUP1000)
- connector with pre-assembled BIS RapidStrut® Slide nut(s)
- to make fabrication with Strut Rail
- ready-to-use pre-assembled for a quick fixing, and retains assembly in place before final tightening